We have recently changed the blade heights of our T Blade Post Supports.   The Blade Heights are now approximately 100mm higher across the sizes of T Blade Post Supports.

This change in height is  to allow for installation in areas where termite inspection clearance is required. Under the Termite Management Standards, it is necessary to allow a 75mm clear space from the bottom of the timber post for a visual inspection for termite activity. The 75mm must be from finished ground, landscaping or paving/concrete level.  In situations where the post base is bolted onto existing concrete and a more architectural look is desired; the space may be reduced to approximately 20-25mm and still allow for sufficient inspection under the termite management standard – providing the area around the base is clear and visible.  

There has been no change to any other specifications, product codes or pricing.

As well as our standard T Blade Installation Guide we also now have an Installation Guide Allowing for Termite Inspection Standards.

Below is a chart showing the NEW Blade Heights:

[table “142” not found /]

If you’re wanting any of the old height T Blades, as of 15th January 2018 we have some stocks of the below sizes with the old height blade:

[table “143” not found /]